
![]() |
Professional Automotive Repair Technical Discussions for March 11, 2007 International Automotive Technicians' Network (iATN) - Members Only |
Next ![]() |
(Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. |
Open Help Requests for Ford
Help Request | Answers | |
1998 Ford Escort ZX2 Hot Coupe 2.0L starting VIN: 3FAKP1134W hello, this vehicle came in with a no heat problem. What I did to fix it was open the radiator while it was running and fill it up slowley to get all the bubles out, then the heat started working. A few days later the customer came back with the same problem. ... |
View | |
2001 Ford Focus Street 2.0L manual 1st VIN: 1FAFP34301 overhauled this 4F27E trans. It came in on the hook so no road test was possible before repair. The clutches were all burned. The diff was destroyed, and the pump bushing spun out, all due to abuse from being stuck in the snow. After overhaul it has no apply i... |
View |
Fixes & Summaries for Ford
Fix/Summary | Answers | |
1991 Ford Taurus SHO 3.0L Starting VIN: 1FACP54Y7M still have not fixed vehicle. Checked all grounds that I could find - especially around battery. installed known good ecm, no change. got ahold of known good relay control box will try that next. Sorry i didnt have better news. I still have a few replies that ... |
20 | |
1996 Ford Taurus SHO 3.4L MIL Lamp on, P01414 VIN: 1FALP54N3T Hi Guys, Thanks for the replies. I will summarize this as briefly and accurately as possible. Basically, there is a bunch of grounds, called 'power grounds' coming out of this Ford PCM. Seven of 'em altogether, at pins 3, 23, 24, 51, 76, 77, 103. There is a ... Trouble codes: P1414. |
6 | |
2000 Ford Explorer XLS 4.0L air intake VIN: 1FMZU73E9X sorry to get back so late but i actually forgot i had this still open. i replaced iac and problem solved and thanks to all. greg |
13 | |
2002 Ford Taurus LX 3.0L No Start VIN: 1FAFP52U12 I want to start by saying thankyou to all who replied. Although the tech had checked powers and grounds he ran a separate power feed to ecm and vehicle started right up. Traced through wiring harness on drivers side of vehicle and found a partially corroded ap... |
13 |