|Prev||Professional Automotive Repair Technical Discussions for October 29, 2006
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1992 Dodge B250 3.9L Oil dip stick tube VIN: 2B7HB21X1N
This van was brought in with a blown engine. The customer had noted the dipstick tube was broken at the attaching clip. Chrysler no longer services this tube and according to my dealer, it only fits 92-93 V6s. The dipstick itself is still available. Any ideas?
|1999 Jeep Grand Cherokee Laredo 4.7L Cuts out, Stall, gauges go out VIN: AW34E56TGG
I have a cherokee that cuts out and turns off the gauges and other related components as it gets hot, the pcm gets realy hot and the car stalls, asd relay also turns on and off, you can hear it. The Pcm was replaced for a rebuilt unit and it seems to be doing ...
Fixes & Summaries for Chrysler
|1988 Chrysler New Yorker 3.0L Hesitation, Surge, Stall, Misfire VIN: 1C31234358
thanks for all the help and advise,most said check cat, timming, check for damage since it was stolen, we even went and did a injector flush, incase injectors were pluged and also hoping to see if it ran better.. BUT stupid me,, not thinking filled the injecto...
|1999 Dodge Dakota SLT 5.2L Excessive Emissions VIN: 1B7GL22Y1X
Thanks to all the help I received. They were all great suggestions and after all reading them all and doing a lot of reading in the archives I decided to put a Chrysler O2 sensor in front of the cat converter and this brought down my NO PPM from 975 PPM to 315...