|Prev||Professional Automotive Repair Technical Discussions for April 15, 2006
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for European
|1998 Audi A8 Quattro 4.2L front rotors and pads VIN: WAUBG34D8W
good morning; been working on this auri for one year now, and cant seem to get the brakes to quit squeaking on the front. have turned his original rotors, when we repalced the pads, and it stated squeaking within a day, then we replaced the pads thinking the...
|2001 Mercedes-Benz C240 2.6L Misfire VIN: J83A448810
I am at a loss with this one I cannot find any data for the coils to tell if they are bad. but here is the problem car came in with p0303 and p0305 missfire 3 and 5 ok cust wanted plugs replaced and i did now cyl 3 is the only one missfireing. here is what hap... Trouble codes: P0303
|2001 Volkswagen Jetta GLS 1.8L MIL Lamp on VIN: 2VWSD29M21
hi everyone i need help,this problem first time meet,i bypass air pump,use two wire form battery terminal to air pump,testing air pump is working.i guss two os sensor was bad,and recommen customer replace first. Trouble codes: P0411
Fixes & Summaries for European
|2000 BMW 328i 2.8L Poor Idle Quality VIN: WBAAM5337Y
Thanks to all that replied to my help request. I posted an intermittent problem a co-worker was having. I received many replies that tried to address this cold start idle problem. We have looked at all the suggestions and have tried to cover all the bases. As ...
|1997 Jaguar XK8 4.0L Cooling Systems VIN: SAJGX2747V
Thanks to all that replied- Most said the water pump impeller does typically fall apart, upon disassembly found this to be the case. Replacing the pump solved the problem, new pump from dealer had a numbe of changes. Jason [...]
|1990 Mercedes-Benz 300TE 3.0L No Start, Poor Idle Quality, Hesitation VIN: WDBED903DL
We made a harness to test the eha valve and it and the signals to it were proper at approx 7 milliamps. We checked and changed the accumulator in the rear of car. It was leaking and causing pressure problems on startup and warm up.
|1992 Porsche 968 3.0L pinging VIN: WPOAA2965N
Thanks to all that responded! I had a motorvac done to the car but it did not reduce the pinging. No vacuum leaks were found. I had posted that this was a low kilometer car but I had my doubts and with a little prodding the 'customer' indicated that the milage...