|Prev||Professional Automotive Repair Technical Discussions for February 10, 2006
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1999 Dodge Ram 1500 Van 5.2L Stall VIN: 1B7HF16Y3X
This truck starts fine ever time. fuel with in spec and holding over nite.When cust backs out of drive way or coming to stop with in the first 5-10 min of driving it stalls.I has happen to me just 2 times and both times fuel is right on but I noticed data inje...
|2000 Jeep Grand Cherokee Laredo 4.0L Hesitation, Cuts out, Stall VIN: 1J4GW48SXY
Thanks for checking this one out. Our customer came in with a complaint of an intermittant cut-out and a slight stumble/misfire. Upon test drive, we did experience a stalling when coming to stops and mostly at idle. It did in fact have a slight stumble which f...
Fixes & Summaries for Chrysler
|1997 Plymouth Voyager SE 3.3L rear brakes VIN: 1P4GP45R3V
Responses were overwhelmingly pointing at the drums. Since we had already re-machined the drums with a very slow cut on the same lathe we've done many hundreds of Voyager drums, plus swapped the drums and still had the noise stay on the right side we still dou...