|Prev||Professional Automotive Repair Technical Discussions for December 4, 2005
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|1993 Dodge D250 5.9L Starting VIN: 3DFREFGTY3
hello, I am working on a 1993 dodge 250 4x4. The complaint is "no start" cold only. I varafied no power at coil and no injector pulse during crank, as vehicle will crank good. i then decided to scan the truck and found that all reading for cold engine where go...
|1998 Dodge Dakota 3.9L No warm Idle flare VIN: 1B7GL22X7W
Hi Chrysler techs . This vehicle was towed in for a cranks / no start condition . When we got vehicle it started right up. Customer said tow truck driver banged on gas tank & vehicle started.Told customer it sounds like a fuel pump but I cannot verify at this ...
Fixes & Summaries for Chrysler
|1996 Dodge Dakota 3.9L gauges VIN: 1B7FL2X4TW
Like i said can't see anything wrong with grounds or wiring, and it won't act up on me again, possible from me removing and installing plug at back of cluster made better conection??? works now cust. took vehicle and I told cust, my next reccomendation would b...
|1998 Dodge Stratus ES 2.4L MIL Lamp on VIN: 1B3EJ56X1W
yes the car is fixed, it appears the car had two problems the timing belt. and the computor had failed. the driver in the ecm was not firing the one coil intermitly.
|2001 Dodge Dakota 3.9L ecm
Overlooked a ground strap which caused the ECM to not communicate with my scan tool. Thanks for all your help I appreciate it greatly.