Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for December 1, 2005
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1994 Chrysler LHS 3.5L No Start VIN: 2GC3ED56F9
hello i am working 1994 chrysler lhs car came in on hook i jumped in car & car ran drove in shop let run for couple minutes & it stalled but restarted did same thing couple of times & then would not start check codes with snap on scanner code 11 check crank si...
View
1998 Chrysler Town & Country (Van) LXi 3.8L Misfire, MIL Lamp on VIN: 1C4GP64L4W
car came in with a check engine light on steady at idle. intermittently the light will flash while cruising or under load. scanned for codes and found p0300 random misfire. customer replaced plugs and wires before problem started. while watching scan data, we ... Trouble codes: P0300 (random misfire)
View
2002 Dodge Durango SLT 5.9L transfer cas VIN: 1B4HS48Z72
The four wheel drive is inop, there is no lights in the main switch assembly, All fuses and wiring seem to be in great shape, we did replace the main switch and still no operation or any lights , so with out the lights I cant go any farther in diag, of the tru...
View
1999 Jeep Grand Cherokee Limited 4.7L position heat doors VIN: 1JK4GW68N3
Vehicle came in with no heat from heater. Front temp door motor did not move and I replaced it. The motor then went in complete circle and I determined that vehicle had broken doors inside the case. Removed the case (poor design) and as archives stated, it had...
View
2000 Jeep Grand Cherokee Laredo 4.0L No Start VIN: 1J4GW48S3Y
Hello everyone I have a jeep 2000 4.0 it will try to start but will not it has 50psi fuel pressure and inj. pulse but only has spark for a few seconds then it goes away,then it will return.It has no codes in it.I also checked the crnk. and cam senser wave form...
View
2001 Jeep Grand Cherokee Laredo 4.7L abs light on VIN: 1J4GW48N81
HAS ABS LIGHT ON, SCANNED AND HAS CODE 25, NO ABS POWER TO CAB MODULE. CHECKED FUSES, OKAY. FUSE #25 IN UNDERHOOD PDC IS PROBLEM CIRCUIT. FUSE IS GOOD, BUT NO POWER AT TERMINAL #9 OF CAB MODULE. PULLED HARNESS AND OPENED UP FROM PDC TO FIREWALL, COULD NOT FIND...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
1994 Chrysler LHS 3.5L No Start VIN: 2C3ED56F8R
Thanks everyone. The timing had jumped. I used a Modis in the scope mode to compare the crank and cam signals at the ecm (pins 44 & 24 ) and they were out of sync. Lee
12
1994 Dodge Ram 1500 Truck 5.2L Surge, Cuts out VIN: 1B7HF16Y3R
Thanks to everyone for responding, i had good info on crank and cam sync, mine was a steady -2 to -3 so that was not a problem. It turned out to be a bad crank sensor, i was confused why the symptom changed to much when i replaced the crank sensor the first ti...
6
1998 Dodge Ram 2500 Truck 5.9L Hesitation, Stall, Misfire VIN: 1LO552L521
Thanks to Robert in Texas, the injectors had crap running inside the fuel rails. I flush the rail back to the fuel filter. Customer is now test driving and has not have any problems. Thanks Robert from Texas. For the other two guys that replied back , I did ch... Trouble codes: P0300, P0306, P0301.
4
1996 Jeep Cherokee Sport 4.0L No Start VIN: 1J4FJ855TL
Well, it alive! Received so many replies pointing to the crank sensor.It indeed shorted and caused the PCM to partially shut down. Thanked all that responded. One tech had a similar case with an Ho21 shorted by the P/S bracket. It was also pointed out to me th...
23
2000 Plymouth Neon High Line 2.0L Excessive Emissions, Poor Idle Quality, Poor Fuel Economy VIN: 1P3ES46C3Y
Hi, Well first, thansk to all that had replied. I came in on the sunday after the post and did all the voltage drop tests. Everything checked o'k. Customer picked up car on Monday to take to the Chrysler dealer. They have Promised to let me know what the probl... Trouble codes: P0139 (o2 stays at center), P1281 (engine stays cold too long), P1193 (iat sensor volts too high), P0118 (ect sensor volts to high).
6
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next