|Prev||Professional Automotive Repair Technical Discussions for November 25, 2004
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Chrysler
|2000 Dodge Durango 4.7L abs VIN: 1B4HS28N5Y
This vehicle belongs to a used car lot that I perform safety checks for. It was noted that when coming to a firm stop, the brakes would lock up incredibly and the vehicle would die. I replaced the front rotors and pads because they were at 0%, and after search...
|2002 Dodge Stratus SE 2.4L No Start VIN: 1B3DJ46Y61
Car came in with a no start and no crank condition, there is not communication with scan tool to any computer. After some seconds with switch on, a message come in the cluster display and it says "no bus". I have some alldata info but it doesn't say further in...
|1996 Jeep Grand Cherokee Laredo 4.0L over drive VIN: 1J4EZ58S8T
hi techs need some advise on this trans problem.the transmisson will not shift out of overdrive on highway.up ontil now when speed would hit around 80kils it would shift and the tact would drop down in rpm.no problems with trans in pass.had the trans flushed 6...
Fixes & Summaries for Chrysler
|1995 Chrysler Cirrus LX 2.5L 2-3 shift VIN: 1C3EJ56HXS
Thanks for the replies. I THINK we fixed it. Everyone agrees this is an electrical problem ,but everything electrical has been replaced or tested six ways to Sunday. Back to the books. The TCM tests the solenoids every ten seconds with a micro-pulse, then look...