|Prev||Professional Automotive Repair Technical Discussions for July 25, 2004
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1992 Ford E-350 Econoline 7.3L Electronic VIN: 1FDKE37MXN
this vehicle was sent here by another shop which had done all the prior repairs trying to correct this problem.vehicle will set a code 29 fairly consistantly after about 3 miles of driving after 3drive cycles shifts will firm up and overdrive light starts flas...
|1994 Ford Mustang 3.8L Misfire VIN: 1FALP4049R
Greetings iatn folks, i've got a 94 mustang here with a 3.8 V6, the driver for #6 fuel injector (inside the computer) is shorted, scoping #6 inj. control shows a steady 0.4 volts or so... injector resistance is 14.7 ohms which seems good. My question is: are ...
|1995 Ford Taurus GL 3.0L MIL Lamp on VIN: 1FALP52UZS
95 taurus, 3.0, standard engine. has no drivability issues, intermittant ses light,332 code. have checked pfe, when grounding with test light to ground, pfe signal drops to 1 volt, from 3.6 at idle, valve has 2" vacuum at this time. has 5 " vacuum at valve ... Trouble codes: 558 (vacum regulator circuit error), 332 (egr low flow)
Fixes & Summaries for Ford
|1997 Mercury Villager (Van) GS 3.0L Stall, MIL Lamp on VIN: 4M2DV1118V
well the vehicle appears to be fixed - as almost all of yoy said - check the line going to the transducer- -- it was cracked - as soon as i touched it - it broke in my hands - replaced - test drove several times and released to customer - also advised about th... Trouble codes: P0400, P0325.