|Prev||Professional Automotive Repair Technical Discussions for June 20, 2004
International Automotive Technicians' Network (iATN) - Members Only
|(Also Available: All, Asian, Chrysler, European, Ford, GM.)|
|Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.|
Open Help Requests for Ford
|1995 Ford Taurus GL 3.0L torque converter clutch valve VIN: 1MELM55U4S
transmission slipping @ 65 mph, did a trany service, no metal shavings, oil a little bit dark, but don't smell burnt, i think is torque converter clutch solenoid but customer said i need to be sure because he don't have too much money
Fixes & Summaries for Ford
|1990 Ford LTD Crown Victoria 5.0L MIL Lamp on VIN: 2FAPC79F0L
well all...i have checked the wiring from the diag monitor to the safing sensors and the crash sensors with no faults...customer did not want to dig up a diag monitor form the boneyard nor pay for it so has decided to tape over the light but i did receive much...
|1999 Ford F-250 Super Duty Lariat 5.4L Surge, Misfire VIN: 1FTNX21L1X
Customer brought vehicle back in after they replaced a bad exhaust manifold gasket themselves. I checked the PCV hard line really close and found a crack under the foam insulation used to protect the tubing.(thanks for the suggestions to check here my fellow t...
|1999 Ford Escort SE 2.0L Compressor VIN: 1FAFP13P7X
My thanks to all who replied. Turns out it was the CRCM.I attempted to repair it,as Tim [...] suggested,but the board was burned beyond repair As some suggested I checked the air gap on the clutch,it was OK.Pressure switches had all been checked previously.as...