|
2005 Ford Escape XLT 3.0L Poor Idle Quality, Misfire, MIL Lamp on
Hard misfire #5 have move coils around,ohm wires to PCM,pulled valve cover looked at cams,valve springs ect.,check for vacuum leaks,run compression test. I'm thinking internal vacuum leak ,have smoked ,no leaks found .well maintained ,engine clean inside.
FIX posted 1/29/2013
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 26 Replies Received (View Replies)26 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
26 Replies Received
26 Replies Received
Related Documents & Media | VIN | 1FMYU03185 |
| Engine | 3.0 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Misfire, MIL Lamp On |
| Occurs | Always, Cold, Hot, Under Load, Idle |
Trouble Codes
| P0174 | Fuel System Too Lean (Bank 2) |
| P0305 | Cylinder 5 Misfire Detected |
| P0316 | Misfire Detected On Startup (Within the 1st 1000 Revolutions) |
Message Closed w/FIX
Vehicle Data
2005 Ford Escape XLT
| VIN | 1FMYU03185 |
| Engine | 3.0 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Misfire, MIL Lamp On |
| Occurs | Always, Cold, Hot, Under Load, Idle |
Trouble Codes
| P0174 | Fuel System Too Lean (Bank 2) |
| P0305 | Cylinder 5 Misfire Detected |
| P0316 | Misfire Detected On Startup (Within the 1st 1000 Revolutions) |
Video