
1996 Ford Windstar GL 3.8L Cuts out, Misfire, MIL Lamp on
p0340 only hard code,cam sensor wiring has been tested,all grounds back to pcm have been checked,cam sensor and pcm have been replaced,code always [...] cam sensor out of sync.180 degrees,set up sensor to number 1 cyl [...] engine runs better,but p0340 still c...
FIX posted 4/17/2006
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)11 Replies Received(Hide Replies)11 Replies Received
|
Message Closed w/FIX
|
VIN | 2FMDA5147T |
Engine | 3.8 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Cuts Out, Misfire, MIL Lamp On |
Occurs | Hot |
Trouble Codes
P0133 | Heated Oxygen Sensor (Bank 1 Sensor 1) Slow Response |
P0153 | Air Fuel Sensor (Bank 2 Sensor 1) Slow Response |
P0300 | Multiple Misfire Detected |
P0340 | Camshaft Position Sensor 'A' (TDC) Circuit Intermittent |
P0420 | Catalyst Efficiency Below Threshold (Bank 1) |
Message Closed w/FIX
Vehicle Data
1996 Ford Windstar GL
VIN | 2FMDA5147T |
Engine | 3.8 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Cuts Out, Misfire, MIL Lamp On |
Occurs | Hot |
Trouble Codes
P0133 | Heated Oxygen Sensor (Bank 1 Sensor 1) Slow Response |
P0153 | Air Fuel Sensor (Bank 2 Sensor 1) Slow Response |
P0300 | Multiple Misfire Detected |
P0340 | Camshaft Position Sensor 'A' (TDC) Circuit Intermittent |
P0420 | Catalyst Efficiency Below Threshold (Bank 1) |