
1997 Dodge B2500 3.9L Cuts out, Misfire, MIL Lamp on
Van originally came in with a low charging voltage & misfire # 4 cylinder code with a complaint of no power. Scoped the ignition & found a bad plug wire to number 4. Replaced the set with a new cap & rotor. Looked good on the scope & test drove fine. No codes ...
FIX posted 5/24/2007
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)3 Replies Received(Hide Replies)3 Replies Received
|
Message Closed w/FIX
|
VIN | 2B7HB21X3V |
Engine | 3.9 L / 6 cyl / GAS |
Trans | 3-speed Automatic |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Cuts Out, Misfire, MIL Lamp On |
Occurs | Hot |
Trouble Codes
47 | Charging System Voltage Low |
P0300 | Multiple Misfire Detected |
P0301 | Cylinder 1 Misfire Detected |
P0302 | Cylinder 2 Misfire Detected |
P0304 | Cylinder 4 Misfire Detected |
P1391 | CKP Or CMP Sensor Signal Intermittent |
Message Closed w/FIX
Vehicle Data
1997 Dodge B2500
VIN | 2B7HB21X3V |
Engine | 3.9 L / 6 cyl / GAS |
Trans | 3-speed Automatic |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Cuts Out, Misfire, MIL Lamp On |
Occurs | Hot |
Trouble Codes
47 | Charging System Voltage Low |
P0300 | Multiple Misfire Detected |
P0301 | Cylinder 1 Misfire Detected |
P0302 | Cylinder 2 Misfire Detected |
P0304 | Cylinder 4 Misfire Detected |
P1391 | CKP Or CMP Sensor Signal Intermittent |