 Prev |
Professional Automotive Repair Technical Discussions for March 27, 2024 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2005 Chrysler Crossfire 3.2L radio,lights on dash,top not operating VIN: 1C3AN65L55 Fuse 7-BCM 5 amp fuse blows when you plug the BCM in-with the BCM unplugged fuse does not blow -no grounded wires. NPC automotive does not work on Crossfire BCM- I need to know a reputable BCM repair company that can repair it, I checked out Automotive Cir... |
View | |
| 2005 Ford F-350 Super Duty King Ranch 6.0L No Start VIN: 1FTWW32P65 Vehicle came in with a crank, no start condition. Upon removing the diesel filter cap, it was found that it was full of engine oil. The engine oil cooler was replaced about a month ago at another shop. I've worked on 7.3l with this problem in the pa... |
View | |
| 2002 Mitsubishi Montero Limited 3.5L MIL Lamp on VIN: JA4MW51RX2 i can erase the codes and drive and no codes come up and it runs good, then when i start it again p0340 andm p0345 come back. im pretty sure this needs a pcm, it is a 2002 model year and 3.5 engine, my scanner identifies it as a 2004 with a 3.8 (snapon ver... Trouble codes: P0340, P0345 |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2011 BMW 335i 3.0L Valvetronic VIN: WBAPM5G56B Alright boys, got this fixed. TLDR- bad driver in the DME So after the last update I went ahead and took off the valve cover to inspect the servo motor and eccentric shaft. They looked good with no obvious signs of wear, I did notice that the eccentric ... |
11 | |
| 2012 Ford Fusion SEL 2.5L Steering Codes VIN: 3FAHP0JA8C This veh. would be hard to steer at times when first start only in one direction and then its fine, Replaced rack with reman, everything worked fine but had a u0100 and a u2101 code, could not get into the system with a R.A.P. system. Took to the ford dealer t... |
3 |
