 Prev |
Professional Automotive Repair Technical Discussions for November 20, 2023 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2014 BMW X5 xDrive35i 3.0L Misfire VIN: 5UXKR0C57E This car came to us from one of our local dealerships. Customer complaint was poor performance and a illuminated check engine light. We found active misfires with oil that was heavily contaminated with fuel. We installed 6 new injectors with the EU6 design... Trouble codes: 14031, 14041, 14000, 14030, 14040 |
View | |
| 2008 Ford F-150 Lariat 5.4L Poor Idle Quality, Misfire VIN: 1FTPX14598 Not sure where to go on this one. Customer bought an auction vehicle and stated the engine sounded like a diesel so he replaced all timing components with OE ford parts including chains, guides, phasers, vct solenoids and all rockers and lifters on bank 2 ... |
View | |
| 2000 Toyota Sienna LE 3.0L Misfire VIN: 4T3ZF13CXY I have another doozy! At least for me it is. This one arrived blowing the EFI fuse. This fused circuit went right to the ECM. If I unplugged the ECM, the fuse would not blow. If I plugged the ECM in the fuse would blow. Put a reman ECM in it and it started... Trouble codes: P0171, P0172, P0302, P0304, P0306, P1130 |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2014 Chevrolet Cruze LT 1.4L Turbocharger VIN: 1G1PC5SB8E Figured it out and this was a bit of a weird one. No previous codes when vehicle came in. I had already checked back pressure like suggested, all okay there. Ended up pulling only the hose to wastegate which would stop the wastegate from opening and drove the ... |
18 | |
| 2011 Jeep Grand Cherokee Overland 3.6L charging VIN: 1J4RR6GG0B Thank you to all who replied. Especially Louis [...]. who reached out and helped. I added an external regulator to the Jeep. I left the sense wire connected to the PCM and the SES light remained off and it charged correctly. Thanks again. |
11 |
