 Prev |
Professional Automotive Repair Technical Discussions for October 12, 2023 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2011 BMW 550i xDrive 4.4L Front end suspension/Drivetrain VIN: WBAFU9C57B Suspension during loading/unloading with special tools on alignment rack present no noise. However during test driving, an intermittent clunk/pop can be heard from the direct center of the vehicle. A notable noise to me is the popping/creaking noise while ... |
View | |
| 2009 Ford Mustang 4.0L Poor Idle Quality, Hesitation, Surge, MIL Lamp on VIN: 1ZVHT80N09 Customer complaint, “car falls on it’s face when gas pedal is pushed to go up a hill or to pass someone and CEL will come on, customer will shut car off and restart and all is well” We test drove vehicle 3 times with no drive ability issues. Asked customer... Trouble codes: P0320 (Ignition/distributor engine speed circuit) |
View | |
| 2019 Kia Sorento EX 3.3L abs VIN: 5XYPHDA52K Vehicle came to us from another shop, the ABS/TRAC warning lights on, one fault in the entire car, in the ABS/ESC, C240201, motor electrical, we use the factory KDS scanner, after checking all inputs, 3 powers, 2 grounds and 4 CAN wires, (all inputs normal... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2017 Dodge Grand Caravan SXT 3.6L MIL Lamp on VIN: 2C4RDGCG0H thanks for all the replies. first off the code p0052 ended up being the brown heater wire was damaged. repaired that and code did not return. it turns out our parts manager was trying to save an few bucks and bought the cats off of ebay for 150.00 a set. so ne... Trouble codes: P0420, P0430, P0052. |
7 | |
| 2007 Mercedes-Benz S550 5.5L transmission limp mode VIN: WDDNG71X27 I dropped the pan and removed the valve body to check the solenoids. They were all in spec for resistance. Then I swapped the solenoids with the codes to other positions on the conductor plate and re-scanned. Same codes came back so I called it a bad TCU. Got ... |
4 |
