 Prev |
Professional Automotive Repair Technical Discussions for September 15, 2023 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2006 BMW 330i 3.0L No Start VIN: WBAVB33516 Car was towed in after cutting off while driving. Admittedly hard by clients son. Has good fuel pressure, compression, has continuous injector pulse while cranking, has spark while cranking, has RPM of 250 while cranking. Air mass and MAP sensor readings s... |
View | |
| 2009 BMW 328i 3.0L Convertible top VIN: WBAWL13519 Autel MK908II live data while operating CTM, all sensors showed signs of activity thru the cycle, concluding sensors good. manually tested locking Hall sensor located passenger side near upper lock- with top in full open position. Tests Good. CODE:00... |
View | |
| 2016 Cadillac CTS V 6.2L Poor Idle Quality, Misfire, MIL Lamp on VIN: 1G6A15S6XG This car has a misfire, on all cylinders. At idle, it will randomly misfire here and there, but if you hold the rpms up to 2k, it shows a lot of misfires on all cylinders. When driving the car, it seems to be okay under light load, but once you get to crui... Trouble codes: P0300 (Random Misfire) |
View | |
| 2012 Hyundai Accent GS 1.6L Exhaust Cam Sensor VIN: KMHCT5AE7C cleared codes, run for one minute shut of restart P0017 is back. Live data on Autel MK908II shows Exhaust Camshaft actual position -12.652, desired position -12.652 no change at any rpm, signal is flatline. Removed valve cover with eng. at TDC checked cam ... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2011 Chevrolet Cruze LT 1.4L Poor Idle Quality, Misfire VIN: 1G1PF5S99B Thanks everyone for taking the time to reply. I don't fully understand how the pcv system works on this engine, but the valve in the cam cover appears to be a calibrated vacuum leak. I replaced the aftermarket cover with O.E. and the cold start up improved sig... |
9 | |
| 2018 Ford Escape SE 1.5L Mechanical VIN: 1FMCU9GD9J found timing was off. bent valves. customer hasnt said ok to go any farther yet. |
10 |
