 Prev |
Professional Automotive Repair Technical Discussions for August 29, 2022 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2009 Ford Escape XLT 2.5L A/C system VIN: 1FMCU93779 This vehicle has been driving me insane. I consider myself fairly experience with A/C work but I am lost. This vehicle came in for inoperative A/C. Hooked the gauges up and found low side around 90 psi and high side around 350psi. Right away I thought it m... |
View | |
| 2018 Ford F-150 XL 3.3L starter VIN: 1FTEW1CB7J Got this F150 that won't crank unless you push really hard straight in on the key while cranking. The data on the pcm shows the pcm is recognizing crank request and is commanding crank. Looking at the wiring diagram there is no direct link between ignition... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1986 Ford Bronco II Eddie Bauer 2.9L Misfire VIN: 1FMCU14T5G I put on a NEW aftermarket alternator--ran on test bench and less than a .1 volt of AC cvoltage. Checked all grounds--less than .1 voltage drop. The Ecm had been swapped out with a known good unit and the distributor pick up replaced with no change. I feel th... |
17 | |
| 2018 Ford F-150 XL 3.3L Discharge pressure VIN: 1FTMF1CB7J Thank you everyone for your great suggestions. To recap, on the initial visit I had replaced the condenser/drier and expansion valve. I had recovered the refrigerant and measured it, finding it to be undercharged. after the repairs, I could not get the vehicle... |
15 |
