 Prev |
Professional Automotive Repair Technical Discussions for January 5, 2021 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2000 Ford Expedition XLT 5.4L Monitors unset VIN: 1FMPU16L4Y Good morning and thanks for any help in advance. This vehicle came in with illuminated MIL and lean bank 2 codes. Replaced faulty B2S1 oxygen sensor and repaired air leak to intake duct. After clearing codes have attempted multiple times to run drive cycle... Trouble codes: P1151 (HO2S B2S1 Sensor indicates lean), P0174 (System too lean Bank 2) |
View | |
| 2004 Ford F-150 FX4 5.4L 4x4 VIN: 1FTPW145X4 I cant figure out why the 4x4 is not working. When using the mode selector, to switch from 2WD to 4H or 4L, there is no illumination on the dash. KOEO will turn on the bulbs during the prove out. Connected scanner and found dtc P1867 and p1869. I performed... |
View | |
| 2006 Ford F-150 XLT 5.4L Flex Plate VIN: 1FTPX14V26 The flexplate was replaced by my tech 6 weeks ago due to ground teeth in one spot. Starter was also replaced then. A month later truck got towed back in with the center broke out of the new flexplate. I checked crank endplay and couldn't find any problem. ... |
View | |
| 2010 Ford F-150 FX4 5.4L Steering power assist VIN: 1FTFW1EV3A Vehicle presented with loss of power steering, fluid soaked around reservoir. Topped up and vacuum bled per Ford procedure. When running, fluid was extremely turbulent in the reservoir. After a short drive (under 5 miles) the fluid would become aerated res... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2008 Ford Escape Hybrid 2.3L No Start VIN: 1FMCU59H18 Okay this thing stopped blowing the fuses. Traced the harness back anc could find no place where it was grounding. We added two fuses to the circuit. One at each inertia switch. That way when if it blows at least I'll know where to start. He has been driving ... |
4 |
