 Prev |
Professional Automotive Repair Technical Discussions for December 7, 2020 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2007 Jeep Grand Cherokee Limited 4.7L Noise VIN: 1J8HR58N47 This vehicle came in for a groaning (hooting) noise while idling. I tracked it down to the tube that goes from the EGR vale to the intake manifold. We replaced the o-ring style seal on the end of the tube that goes in the manifold and gasket at the EGR val... |
View | |
| 2015 Ram 1500 Limited 3.0L MIL Lamp on VIN: 1C6RR7NMXF Hi I have a 2015 ram 1500 has code p0191. Fuel rail pressure sensor A circuit performance. Have scanned and scoped the pressure sensor can never see a fault. It is very intermittent and hope some may have so info on a direction I should go Trouble codes: P0191 |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2011 Chrysler Town & Country Touring L 3.6L No Start VIN: 2A4RR8DG6B we replaced the timing chain an it runs fine. had no codes at first but the more we tried to start it it give me a cam code looked in to that and found a lot of slug in the motor glugging up the cam phasers and bank 1 jumped time |
22 | |
| 2013 Jeep Grand Cherokee Overland 5.7L No Start VIN: 1C4RJFCT4D Broken splice on the relay blue wire we found when cranking over the blue wire off the relay was loosing power cked the wire at the splice and found the problem and repaired the splice works fine now |
7 |
