 Prev |
Professional Automotive Repair Technical Discussions for April 27, 2020 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for European
| Help Request | Answers | |
| 2011 Mercedes-Benz S550 4Matic 5.5L Air ride level VIN: WDDNG8GBXB CODE 5287. I bought this car last year and the front end started going down a month after purchase. I got 2 OE rebuilt struts from Arnot and have had a problem ever since. We replaced the struts 3 times along with the valve and pump. The only way I can dri... |
View | |
| 2015 Mercedes-Benz ML63 AMG 5.5L Misc VIN: 4JGDA7EB8F Good Day members I need some advise.I have a customer interested in purchasing a 15 ML 63 AMG..I haven't had many come thru the shop so i cant tell my customer if they are reliable or not. Any one out there that is a bit more familiar with these? Ive looke... |
View | |
| 2012 Volkswagen Routan SE 3.6L Cooling fan VIN: 2C4RVABG4C when you start it cold, It gets up to 200 degrees, low speed fan turns on, runs for 30 seconds, High speed kicks in and it sets the code. Have checked powers and grounds, replaced the low speed resistor, checked amperage draw on the cooling fan. 11amps on ... |
View |
Fixes & Summaries for European
| Fix/Summary | Answers | |
| 1988 BMW 325i 2.5L No Start VIN: WBABB2303J Thanks to everybody that replied, this car is up and running after replacing the motronic cu , at last. As you can read on my post, I did some extensive testing of all circuits & components , and left , and assuming that the ecu was ok. After more than 20yrs e... |
29 | |
| 2002 Porsche 911 Carrera 4S 3.6L readiness monitors VIN: WP0AA29982 Thank you for all your help. This is California, so ALL the monitors need to be set for this year. Disconnected the battery (did not help) Checked coolant temp (ok) check fuel trim (ok) ended up reflashing DME and now all monitors set. Thank you again, and sta... |
10 |
