 Prev |
Professional Automotive Repair Technical Discussions for April 21, 2020 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2014 Ram 4500 SLT 6.7L MIL Lamp on, Limp in mode VIN: 3C7WRLEL9E Hi thanks in advance for any insight. I have repaired the lost comm. Problem finding a pushed out pin at connector i200 and a broken wire at fuse 18 in the pdc. Which brought about the last 2 dtc's . I started with p21c4 following diagnostic steps for that... Trouble codes: U0101, P2BAC, P21C4, U11C1 |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2009 Chrysler Aspen Limited Hybrid 5.7L No Start VIN: 1A8JW18T19 I didn't really get anywhere with it but I did want to say one last thing. I can't help but think that scan tool function is not where it should have been. Even with the WiTECH, I couldn't get most bidirectional controls or tests to work in the hybrid module... |
7 | |
| 2001 Dodge Ram 3500 5.9L No Start VIN: 3B6MF36611 Thanks for all the input.Replaced the retrofit relay got voltage to pump.Fuel pressure was low,replaced lift pump in tank,fuel filter,bleed system, cranked right up. Thanks again. |
15 |
