 Prev |
Professional Automotive Repair Technical Discussions for March 24, 2020 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2012 Dodge Avenger SE 2.4L Starting VIN: 1C3CDZAB9C crank no start, can jump starter at tipm and will run no blown fuses, no codes, like bad ignition switch |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 1998 Dodge Caravan SE 3.3L Blower Motor VIN: 1B4GP45G5W Thank you for all the responses. By the way I do have Identifix but this one posed a double issue... First the blower motor itself had seized up and was bad, however the main source of the problem came from below the underhood power box where rodents had chewe... |
12 | |
| 2010 Dodge Journey SXT 3.5L Cuts out, Stall, MIL Lamp on VIN: 3D4PH5FV2A Sorry for not getting this closed earlier and thanks to all that replied. Robert hit this one. Although the coolant temp sensor had been changed, the PCM had not been cleaned up. Also the crank sensor connector was green. I replaced the sensor, soldered in a n... Trouble codes: P0403 (EGR control open), P0406 (Position sensor circuit high), P1128 (Closed loop not achieved Bank 1 s1), P1129 (Closed loop not achieved Bank 2 S1). |
4 |
