 Prev |
Professional Automotive Repair Technical Discussions for September 4, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2007 Jeep Liberty Limited 3.7L Poor Idle Quality VIN: 1J4GK58K57 Howdy Y'all! This Liberty was towed in and customer comment won't stay running. Sure enough it doesn't ?? If ya drive with both feet. As long as Rpm is 1500+ the vacuum looks good 18-22 As soon as Rpm falls near 1000 the vacuum nose dives to 10 or nearly 0... Trouble codes: P0300 |
View | |
| 2008 Jeep Commander Limited 5.7L MIL Lamp on VIN: 1J8HG58218 tested for vacuum and exhaust leaks. replaced intake gaskets. The map sensor reading seems right. reading the same as a vacuum gauge teed in. baro is correct for area. I thought for sure it was the intake seals they were flat as a pancake. even tho I could... Trouble codes: P0171 (bank one lean), P0174 (bank 2 lean) |
View | |
| 2012 Jeep Wrangler Unlimited Sport 3.6L Hesitation, Cuts out, MIL Lamp on VIN: 1C4BJWDG6C Have a wrangler that's giving me a real hard time. At WOT or going up a steep hill it falls flat on its face but drives decent under light acceleration. Had codes P2110 (ETC forced limit RPM) and P2173 (high airflow/vac leak). Throttle was very erratic und... Trouble codes: P2110 |
View | |
| 2012 Jeep Wrangler Unlimited Sport 3.6L Hesitation, Cuts out, MIL Lamp on VIN: 1C4BJWDG6C Have a wrangler that's giving me a real hard time. At WOT or going up a steep hill it falls flat on its face but drives decent under light acceleration. Pedal to the floor the RPMs climb high but lacks power and has very delayed upshift. Had codes P2110 (E... Trouble codes: P2110 |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers |
