 Prev |
Professional Automotive Repair Technical Discussions for January 30, 2019 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2016 Dodge Grand Caravan SE 3.6L MIL Lamp on, no cluster VIN: 2C4RDGBG7G hello everybody this car came in with the wiper always on as soon you turn the ignition on and the sw is off the flashers are not workings everything for the combo sw is not working (rear wiper,w/w front and back, high beam) the cluster is not working eith... Trouble codes: U0155 |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2002 Dodge Ram 2500 5.9L Abs VIN: 3B7KF23C72 Digging more into the Modis being unable to communicate with the ABS module led us to perform some troubleshooting of the CCD bus. We found a mouse had chewed up the harness inside the boot at the firewall one of the broken wires was the CCD Bus (+) wire. Th... |
9 | |
| 2007 Dodge Ram 1500 TRX4 5.7L 4 wheel drive VIN: 1D7HU18207 sorry for the late reply. replaced the tipm. which i must say was very pricey thru dodge. 1600 dollars to be exact. oh well. verified repair. test drove and checked 4x4 operation. all good. code did not return and everything works ok. thanks for all the replie... |
3 | |
| 2007 Dodge Caliber SE 2.0L Misfire As always, thanks to all who took time to reply. Special thanks to Rick and Gary. Always nice to get the dealer techs to give their input. I do have the WiTech2 platform. I was not aware of the green lightning bolt non-essential updates. I don't remember ever... Trouble codes: P0300. |
4 | |
| 2007 Jeep Wrangler X 3.8L Heat VIN: 1J4FA24157 Yes, I was in denial, turns out heater core was restricted. I was reluctant because after flushing heat worked fine for a while before going cold again, not to mention a 10 hour job to replace heater core. FYI, I cut heater core open after removal and found 1/... |
13 |
