 Prev |
Professional Automotive Repair Technical Discussions for October 31, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2001 Dodge Ram 3500 5.9L Poor Idle Quality, Misfire VIN: 1B7MF33671 Hello, I have a Cummins here that I would like to see gone. I pulled the cam to reseal the timing gear housing. Everything went together great, cracked the fuel lines and got it started pretty quick. Let it idle in the bay for 20-25 minutes, smooth as g... |
View | |
| 2005 Jeep Grand Cherokee Limited 4.7L timing chain noise VIN: 1J8HR58N95 This engine has a timing chain noise. The chain is loose on the passenger side. I replaced the tensioner, and it still is loose. There is .075" of play between the tensioner and the slack adjuster. I am not super familiar with this engine, so I was wonderi... |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2002 Dodge Ram 2500 5.9L govenor VIN: 3B7KF23ZX2 Thanks to everyone who replied. I did unplug the oxygen sensors. It did not fix the problem. I hooked up a manual gauge to governor circuit and compared it to the scan tool and most of the time it matched the scan tool except for one time and the gauge read 15... |
9 | |
| 2013 Dodge Durango Citadel 5.7L No Start VIN: 1C4SDHET5D So after talking with the wife (aka daily driver) we got some more information that was helpful in finding a problem but maybe not the full problem. She stated that she would go to start and would hear a click but no start most of the time. She also shared tha... Trouble codes: B1A35. |
11 | |
| 2011 Jeep Liberty Sport 3.7L 4x4 VIN: 1J4PN2GK5B Since we already replaced all the components we started checking the wiring between the Control Module (under the dash, drivers side) and the Transfer Case. We found that "Step control motor circuit A" was open. We then jumped around the wire from the Transfer... |
6 | |
| 2013 Jeep Wrangler Sport 3.6L No Start VIN: 1C4AJWAG1D reset the system by removing the fuse and told her if it happens again it would need an update for the software. thanks to everyone who responded Trouble codes: P0513 (Invalid skim key). |
4 |
