 Prev |
Professional Automotive Repair Technical Discussions for October 28, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 2006 Ford F-250 Super Duty XLT 6.8L Poor Idle Quality, Stall VIN: 1FTSX21Y06 This customer cam to us because we could smoke test the intake system. Local Ford dealer told him the intake gaskets where the issue. He had a backyard mechanic change out the gaskets but the problem was not fixed. The customer can to use to perform the sm... |
View | |
| 2014 Ford Fusion SE 2.5L Starting VIN: 1FA6P0H78E Vehicle was towed in for a no crank. Starter will start to crank momentarily for and then stop. Checked power to starter solenoid and have voltage for a split second while engine will try to crank. Bypassed starter relay with key on and engine will crank a... |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2008 BMW 335i 3.0L Engine VIN: WBAVG76020 Thanks all The customer still hasn't responded so am closing request. I removed the PCM, opened the case and lower 1/4 has all seen water with a few components appearing to be corroded. Have recommened another PCM as the next step. |
5 | |
| 2008 Jeep Wrangler Unlimited Rubicon 3.8L No Start VIN: 1J4GA69118 I appologize for taking so long to close this. Thanks to all the replies! I was able to trace the wiring from the PCM to the TIPM. I found that the PCM was not grounding the fuel pump relay. If I manually provided the ground, the engine would run. While runni... Trouble codes: P0627 (Fuel Pump Control). |
12 |
