 Prev |
Professional Automotive Repair Technical Discussions for August 28, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1995 Ford F-150 Eddie Bauer 4.9L No Start VIN: 1FTEF15Y5S Truck will not start after driving for over 30min.Fuel pump relay start cycling when trying to start and fuel pump start clicking at the same time.Checked fuel pressure when running 50 psi.Low fuel pressure on no start.Checked spark was good. Truck will st... |
View | |
| 1998 Ford F-150 XL 4.2L alternator VIN: 1FTZF1725W So this truck very intermittently blows the 175 Amp alternator mega fuse. It came from another shop where they installed 2 or 3 alternators. It has another Reman unit on it, visually inspected wiring from alternator to fuse and from fuse to starter solenoi... |
View | |
| 2002 Ford Escape XLT 3.0L Cooling System VIN: 1FMCU03122 Alright y'all, this one has me a bit puzzled. Customer's original concern was a coolant smell and overheat during long idle periods (stop and go traffic.) Previous tech found several leaks and replaced the offending items. Customer was still experiencing o... |
View | |
| 2003 Ford F-250 Super Duty XLT 6.0L Starts and dies VIN: 1FTNW21P53 When we got the truck it would have to be started two or three times before it would stay running, after it would stay running it has no problems and drives great. so we started off with replacing oil filter and cap assembly because it had the wrong one in... |
View | |
| 2007 Ford Fusion SEL 3.0L crank no start VIN: 3FAHP08117 I love FORD!!! Hello, we got the vehicle cranking no starting from customer I checked DTC and doubt PATS When keys on immobilizer is fine I try to erase all keys and re-program. no starts it over and I change transceiver and re program keys no workin... Trouble codes: B1600 (PATS ignition key transponder signal is not received), B1601 (PATS received incorrect key-code), P1260 (Theft detected engine disabled) |
View | |
| 2000 Mercury Sable GS 3.0L Compressor and high fan control fault VIN: 1MEFM58UXY Vehicle came in with AC inop. Performed system charge check, confirm compressor not engaging. Checked fuses and connections, relays. Scan found 1 of 2 fans inop with HFC Fault in PID list. Replaced 1 fan, can command on via tool after repair, however AC st... |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1963 Ford F-100 3.6L clutch system VIN: F10JD40064 I went ahead with the original 3 finger clutch and I am pleased with the results. I always like the diaphragm clutch because it seemed to have a pedal feel that was less stiff than the 3 finger. Thanks for the advice! |
15 | |
| 2011 Ford F-150 STX 3.7L No Start VIN: 1FTEX1CM1B thank you for all the replies. i did find a burnt wire under 40 amp fuse in under hood junction box. Trouble codes: U0100, B10F1, B1310, P2301. |
6 |
