 Prev |
Professional Automotive Repair Technical Discussions for May 23, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 2000 Ford Taurus SE 3.0L Unknown VIN: 1FAFP58U9Y Good morning all I have this Taurus here in the shop with a very hard engagement into reverse and drive but it shifts great going down the road. Checked the fluid is clean and owner says he had it flushed. We found the trans mount was leaking and bad repla... |
View | |
| 2006 Ford F-350 Super Duty XLT 6.0L Fuel gauge VIN: 1FTWW31P86 Truck came in with a non-working fuel gauge and DTC B1201 stored in instrument cluster module. Tested at connector on fuel tank and found 10v on yel/wh and 0V at blk/org. Shorted wires together and 10v dropped to 0v on yel/white With no change on gauge. We... |
View | |
| 2011 Ford F-350 Super Duty King Ranch 6.7L viscous fan & compressor VIN: 1FT8W3BT2B After replacing parts and charging, I turned on compressor and it engaged but high side pressure continued above 350 psi. I immediately shut it down. I was able to control the viscous fan with the scanner and could then turn on compressor and everything wa... |
View | |
| 2013 Ford Fusion Titanium 2.0L MIL Lamp on VIN: 3FA6P0K92D Pulled codes got codes B1438:03, B1489:11, U3007:16, and U30013:16, Followed Pinpoint test E for DTC B1438:03, E1 no, E2 yes 4.9V, E6 yes 4.9V, E9 no 0v, E10 yes O.L., E11 yes 0Ohms, E12 yes o.l. on both cks, E13 yes replace current sensor, DTC came back w... Trouble codes: B1438, B1489 |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 2010 Ford Focus SE 2.0L Mechanical VIN: 1FAHP3FNXA New Master and the brakes 100 times better. I am going to let the customer drive it before releasing it as I never drove it before the brake work was done. I am calling it finished as I didn't pucker when I pulled it in front of my toolbox like I did friday ... |
16 |
