 Prev |
Professional Automotive Repair Technical Discussions for March 14, 2018 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Chrysler
| Help Request | Answers | |
| 2012 Dodge Challenger SXT 3.6L Steering Gear/Pump VIN: 2C3CDYAG1C This vehicle has an audible groan/light rumble while steering slowly side to side. You can hear it best inside the vehicle with all the windows shut. You cant really hear it outside at all. It is not a fluid growl. It has plenty of P/S fluid. It is a remot... |
View | |
| 2013 Ram 2500 SLT 6.7L MIL Lamp on, low power VIN: 3C6UR5DL7D Thansk for reading. New purchase, and of course, CEL comes on in 50 miles. Sets P2262, and EGR code. EGR code did repeat on test drive. Low power, at full throttle. Fuel pressures are good. First, I found the Tk starting slow, and it gets worse. the Batter... Trouble codes: P2BAC, P2262 (Boost pressure A no detected) |
View |
Fixes & Summaries for Chrysler
| Fix/Summary | Answers | |
| 2002 Dodge Ram 1500 ST 4.7L headlight VIN: 1D7HA16N52 Thanks everyone for the help, scanned(snap-on-verdict) the cluster and fcm for codes. The FCM had codes (no code number though) stating left and right low beam circuits open(probly from the LED bulbs). I was able to command the drivers low beam on and off wi... |
8 | |
| 2011 Dodge Journey Mainstreet 3.6L rear turn, tail and wiper VIN: 3D4PH1FG6B well so far no fix, I still have not been able to fix this vehicle. We replaced the steering control module, we tried another instrument cluster due to it is what provides the CAN communication to other modules such as BCM. We have checked all wiring and input... |
9 | |
| 2002 Jeep Grand Cherokee Laredo 4.0L MIL Lamp on VIN: 1J4GX48S92 THIS HEADACHE IS FIXED. SELECT CAM SYNC AND SCAN TOOL INDICATE 9 DEGREE OR OUT RANGE. LOOSEN 13 MM BOLT AND TURN CAMSHAFT TO ZERO. SCAN TOOL INDICATE IN RANGE. BEFORE, DROVE 7 MILES AND CODE P1391 OCCUR. AFTER ADJUST CAM, DROVE VEHICLE FOR 60 MILES AND NO MORE... Trouble codes: P1391 (Cam/crank loss signal). |
6 | |
| 2006 Jeep Commander 3.7L 3rd Gear VIN: 1J8HG48K26 Jeep has wrong NAG1 unit in it. As Bruce stated there are several different gear ratios that come in this NAG1 unit. There is only one that goes in this Commander with the 3.7. [...]. Luckily they stamp the number on the unit just above the trans oil pan ... |
6 |
