 Prev |
Professional Automotive Repair Technical Discussions for September 24, 2017 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for All Makes and Models
| Help Request | Answers | |
| 1988 Chevrolet K1500 Cheyenne 5.7L Ac, Dash Lighting VIN: 1GCDK14K5J Vehicle came in for different repairs to the doors,It has recently been repainted throughout and the Body men didnt exactly get the wiring back in place correctly. There are several wires over the years that were altered with splice locks.That have been taken ... |
View | |
| 2005 Chevrolet Express 3500 6.0L Rt Brake Light VIN: 1GBJG31U55 I am stuck on this truck --good customer-- I have running lights, right and left turn signals, left brake light---NO RIGHT BRAKE LIGHT- checked fuse panel under drivers seat and under hood panel--all fuses are OK. New 4 way/ turn signal electronic module. I ca... |
View | |
| 2006 Ford Expedition Limited 5.4L suspension noise VIN: 1FMFU20556 i started hearing a snapping,creaking coming from right rear while driving. can hear it best while turning either direction and while driving slow. it does not do it on rough surface. when i did rear brakes, found right rear axle nut very loose. tightened to s... |
View | |
| 2003 Mitsubishi Eclipse Spyder GTS 3.0L Poor Idle Quality, Stall, MIL Lamp on VIN: 4A3AE75H33 Client originally came in with the Complaint the car would rough idle stall and set check engine light. We found a plethora of issues, and started with a motor rebuild and get the core healthy After all the work, all is great, but the original issue remains th... Trouble codes: 506 (Idle control system RPM low) |
View |
Fixes & Summaries for All Makes and Models
| Fix/Summary | Answers | |
| 2005 Chrysler PT Cruiser Touring 2.4L No Start, Stall, MIL Lamp on VIN: 3C3EY55E85 Okay...original PCM had P1604 code, most were correct on the crank sensor causing the flashing CEL and no start. The wire that I had a question about the voltage on I believe to be the KAM power or chryslers version of one. Have installed yet another PCM albei... Trouble codes: P0032 (1/1 heater circuit high), P0038 (1/2 heater circuit high), P1604 (Internal pcm failure), P0201 (Injector circuit), P0202 (Injector circuit), P0203 (Injector circuit). |
14 | |
| 1989 Toyota Pickup SR5 2.4L Disc VIN: JT4RN13S7K Found some good stuff along the way. First, and most telling, was the bevel cut on the disc splines. Read somewhere and verified with mine that the trans side of disc has a longer bevel on the splines to facilitate input shaft insertion. This supports what all... |
14 |
