× Auto Repair Pros Member Benefits TechHelp Knowledge Base Forums Resources My iATN Marketplace Chat Pricing About Us Join Industry Sponsors Video Members Only Repair Shops Auto Pro Careers Auto Pro Reviews
Join Now
International Automotive Technicians Network
Prev Professional Automotive Repair Technical Discussions for June 5, 2014
International Automotive Technicians' Network (iATN) - Members Only
Next
(Also Available: All, Asian, Chrysler, European, Ford, GM.)
Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder.

Open Help Requests for Chrysler
Help Request Answers
1993 Dodge W250 5.9L alternator VIN: 3B7KM23C1P
The charging system is not working.It has battery voltage at the big terminal on back of alternator. With key on or engine running there is no voltage at either small terminals on the back of the alternator. Checked for voltage at the generator terminal on the...
View
2004 Dodge Durango Limited 5.7L engine VIN: 1D4HB58DX4
Very loud lifter type tap at startup-diminishes slightly after a few seconds-Nearly goes away after idling for 15-20 minutes-shut off engine and restart immediately and noise is as loud as before with same-have removed valve covers and can see 6 new pushrods a...
View
2009 Dodge Grand Caravan SE 3.3L power liftgate VIN: 1D8HN44E29
Power liftgate won't operate. Overhead console and rear switches open and close on data list. Fully open switch remains closed regardless of liftgate position, postion switch 1 and 2 fluctuate between open and closed.
View
2009 Dodge Ram 1500 Sport 5.7L Accessories VIN: 1D3HV13T79
Thanks in advance for the help. We have a Factory Navigation System the customer says starts out working properly, but the voice eventually turns to garble after using it a bit. I am assuming it is the actual Navigation system, is there an aftermarket Navigati...
View

Fixes & Summaries for Chrysler
Fix/Summary Answers
2008 Dodge Sprinter 3500 3.0L MIL Lamp on VIN: WD0PF34598
OK this one is back on the road installing water softeners and what not. quite a big job to replace the manifolds, once i got them off the swirl valves were badly coked up, and the linkage was worn. i replaced the turbo due to leaking oil. i did not replace th... Trouble codes: 2953 (Swirl valve).
3
Prev (Also Available: All, Asian, Chrysler, European, Ford, GM.) Next