 Prev |
Professional Automotive Repair Technical Discussions for April 6, 2012 International Automotive Technicians' Network (iATN) - Members Only |
Next  |
| (Also Available: All, Asian, Chrysler, European, Ford, GM.) | ||
| Vehicle Owners: If you are seeking an automotive repair professional to service your vehicle, visit the iATN Repair Shop Finder. | ||
Open Help Requests for Ford
| Help Request | Answers | |
| 1988 Ford E-250 Econoline Custom 5.0L Excessive Emissions, Poor Idle Quality, Poor Fuel Economy VIN: 1FTFE24NXJ Thanks in advance for all of the quick responses we have had when we have found ourselves scratching our heads. We also don''t work on many domestic vehicles. No codes in Self-test. Vehicle runs rich on right cylinders only (Right side HC= 825 and Left side HC... |
View | |
| 1996 Ford F-350 XLT 7.5L MIL Lamp on VIN: 1FDKF37G7T Hey guys i really need help with this truck,The first thing that Mitchell on demand asks you to use is a special ignition adapter with a EEC V breakout box and we dont have neither.Where should i go from here. Trouble codes: P1351 |
View | |
| 2002 Ford Taurus LX 3.0L Hesitation VIN: 1FAFP55U82 Hi Guys I have A taurus that came in claiming it ran rough and had no power. Confirmed it had no power and when you press the throttle it takes forever to accelerate and takes a good 5-10 seconds to even get up to 3500 rpm. I had checked Maf sensor, idle air c... |
View | |
| 2007 Ford F-150 XLT 4.6L MIL Lamp on, hard start VIN: 1FTRX12W97 Hello everyone, this car had the engine replaced due to flood. It keeps on popping that code and it has a hard start. We tried replacing the cam sensor with no luck. Checked the crank sensor and it shows good. Ohmed all the wires from the cam and also the cran... Trouble codes: P0340 (Cam position sensor circuit fault) |
View |
Fixes & Summaries for Ford
| Fix/Summary | Answers | |
| 1996 Ford E-250 Econoline XL 5.8L Poor Idle Quality, Misfire, MIL Lamp on VIN: 1FTFS24H2T well,this one is fixed. i started by double checking my power supply at the red wire to all injectors,power supply was good. i next checked the ground signal directly at computer for cylinder #1, no pulse. the problem i ran into was finding a replacement compu... Trouble codes: P0171 (lean bank 1). |
6 | |
| 2003 Ford Expedition XLT 5.4L front wheel bearing VIN: 1FMFU16L83 Thank you all who replied to my request. The left actuator was losing vacuum and causing the right one to chatter. I went and replaced the left one,along with the hub/bearing assembly. All is quiet and works good. I will in the future change the right assembly... |
17 | |
| 2004 Ford Focus SE 2.0L Stall VIN: 1FAFP34384 Been waiting for no news is good news. We replaced the IAC with a Standard IGN. Started fine, but on the highway it would hang up, and the car kept going for several seconds. Got the big scan tool, and reset KAM. To be honest, not sure if the KAM was the is... |
10 | |
| 2004 Ford Freestar SES 3.9L buzzing VIN: 2FMZA576X4 We could not get the customer to return. Some ideas were intake runner controls hooked up or vibrating. Another idea was p/s lines noisey, our p/s hose looked modified and we will look into that when the vehicle returns. Thanks for the replies and we will post... |
4 |
