
1995 GMC Jimmy SLE 4.3L Hesitation, Surge, MIL Lamp on
This vehicle runs perfect till hot then hesitates and runs rough and bucks.I see a slight fluctuation in the tach at idle hot [...] all codes and code P0341 REPEATED.I've relocated the harness from any [...] anyone ran into this code or fault? Thanks in advanc...
FIX posted 9/6/2011
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)9 Replies Received(Hide Replies)9 Replies Received
|
Message Closed
|
VIN | 1GKDT13W4S |
Engine | 4.3 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection / TBI |
Emissions | Not OBD-II Compliant |
Symptoms | Hesitation, Surge, MIL Lamp On |
Occurs | Hot, on Accel, Intermittently |
Misc. | Engine Replaced by Onwer |
Trouble Codes
P0141 | Heated Oxygen Sensor (Bank 1 Sensor 2) Heater Circuit Malfunction |
P0337 | Crankshaft Position 58X Sensor Circuit Low Input |
P0341 | Camshaft Position Sensor (TDC) 'A' Circuit No Signal |
P1133 | Heated Oxygen Sensor (Bank 1 Sensor 1) Insufficient Switching |
P1441 | EVAP Vacuum Switch Circuit High Input |
Message Closed
Vehicle Data
1995 GMC Jimmy SLE
VIN | 1GKDT13W4S |
Engine | 4.3 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection / TBI |
Emissions | Not OBD-II Compliant |
Symptoms | Hesitation, Surge, MIL Lamp On |
Occurs | Hot, on Accel, Intermittently |
Misc. | Engine Replaced by Onwer |
Trouble Codes
P0141 | Heated Oxygen Sensor (Bank 1 Sensor 2) Heater Circuit Malfunction |
P0337 | Crankshaft Position 58X Sensor Circuit Low Input |
P0341 | Camshaft Position Sensor (TDC) 'A' Circuit No Signal |
P1133 | Heated Oxygen Sensor (Bank 1 Sensor 1) Insufficient Switching |
P1441 | EVAP Vacuum Switch Circuit High Input |