|
2000 Buick LeSabre Custom 3.8L Excessive Emissions, No Start, Hesitation, Surge, Cuts out, Stall, Poor Fuel Economy, MIL Lamp on
One tech at dealer said it was due to weak magnet on cam gear. So I replaced Timing chain set with new magnet, both cam & crank sensors, water pump. Proformed CKP relearn. Test drove and still cuts out and dies while driving. Looses tach function while driving...
FIX posted 11/18/2010
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 12 Replies Received (View Replies)12 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
12 Replies Received
12 Replies Received
Related Documents & Media | VIN | 1G4HR54K7Y |
| Engine | 3.8 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | Excessive Emissions, No Start, Hesitation, Surge, Cuts Out, Stall, Poor Fuel Economy, MIL Lamp On |
| Occurs | Hot, Under Load, on Decel, on Accel, Cruise, Intermittently |
Trouble Codes
| P0341 | Camshaft Position Sensor (TDC) 'A' Circuit No Signal |
Message Closed w/FIX
Vehicle Data
2000 Buick LeSabre Custom
| VIN | 1G4HR54K7Y |
| Engine | 3.8 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | Excessive Emissions, No Start, Hesitation, Surge, Cuts Out, Stall, Poor Fuel Economy, MIL Lamp On |
| Occurs | Hot, Under Load, on Decel, on Accel, Cruise, Intermittently |
Trouble Codes
| P0341 | Camshaft Position Sensor (TDC) 'A' Circuit No Signal |
Video