
1994 Chevrolet K2500 7.4L Stall, Misfire, Poor Fuel Economy, MIL Lamp on
I tried a new ECM and all pin wires connectors to ECM are tight. I put new wires to control module so there is no open or short in wiring. Tried a complete rebuilt distributer with no luck. After a restart, within 5 seconds the code appears. Runs ok when the l...
FIX posted 11/6/2005
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)11 Replies Received(Hide Replies)11 Replies Received
|
Message Closed w/FIX
|
VIN | 48HSA2424Y |
Engine | 7.4 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / TBI |
Emissions | OBDI |
Symptoms | Stall, Misfire, Poor Fuel Economy, MIL Lamp On |
Occurs | Always |
Misc. | Code 42 |
Trouble Codes
42 | ECM has seen an open or short to ground in the Ignition Control or by-pass circuits |
Message Closed w/FIX
Vehicle Data
1994 Chevrolet K2500
VIN | 48HSA2424Y |
Engine | 7.4 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / TBI |
Emissions | OBDI |
Symptoms | Stall, Misfire, Poor Fuel Economy, MIL Lamp On |
Occurs | Always |
Misc. | Code 42 |
Trouble Codes
42 | ECM has seen an open or short to ground in the Ignition Control or by-pass circuits |