|
1995 Chevrolet S10 LS 4.3L No Start, Poor Idle Quality, Stall, MIL Lamp on
Vehicle will not hold an idle when it came to me I scanned for codes and found bank 1 heated O2 Sensor too rich. I went to monitor mode and the engine is in open loop, which I doubted as the customer drove here from a few miles away. I tested the connector to ...
FIX posted 2/22/2003
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 18 Replies Received (View Replies)18 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
18 Replies Received
18 Replies Received
Related Documents & Media | VIN | 1GCDT19W7S |
| Engine | 4.3 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI / MFI, TWC, |
| Emissions | Not OBD-II Compliant |
| Symptoms | No Start, Poor Idle Quality, Stall, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0700 | Automatic Transaxle System Malfunction |
| P1100 | MAP Sensor Performance |
| P1406 | EGR Valve Pintle Position Circuit Malfunction |
Message Closed w/FIX
Vehicle Data
1995 Chevrolet S10 LS
| VIN | 1GCDT19W7S |
| Engine | 4.3 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI / MFI, TWC, |
| Emissions | Not OBD-II Compliant |
| Symptoms | No Start, Poor Idle Quality, Stall, MIL Lamp On |
| Occurs | Always |
Trouble Codes
| P0700 | Automatic Transaxle System Malfunction |
| P1100 | MAP Sensor Performance |
| P1406 | EGR Valve Pintle Position Circuit Malfunction |
Video