
1996 Ford Taurus GL 3.0L Excessive Emissions, Poor Idle Quality, Cuts out, Stall
After the car is hot it will stall out or idle low due to rich over fueling. It massively overfuels (inj pw 50mS plus). MAF goes to a fixed 5.0 volts, sometimes .65 volts. Both oxygen sensors sit at .41 volts. Sometimes the Cat monitor sensors are at 1.66 volt...
FIX posted 7/14/2004
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)4 Replies Received(Hide Replies)4 Replies Received
|
Message Closed
|
VIN | 1FALP52U4T |
Engine | 3.0 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Excessive Emissions, Poor Idle Quality, Cuts Out, Stall |
Occurs | Hot |
Misc. | 6 10 a R11a Calibration |
Trouble Codes
P0103 | Mass Airflow Sensor Circuit High Voltage |
P0133 | Heated Oxygen Sensor (Bank 1 Sensor 1) Slow Response |
P0153 | Air Fuel Sensor (Bank 2 Sensor 1) Slow Response |
P1100 | MAP Sensor Performance |
Message Closed
Vehicle Data
1996 Ford Taurus GL
VIN | 1FALP52U4T |
Engine | 3.0 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Excessive Emissions, Poor Idle Quality, Cuts Out, Stall |
Occurs | Hot |
Misc. | 6 10 a R11a Calibration |
Trouble Codes
P0103 | Mass Airflow Sensor Circuit High Voltage |
P0133 | Heated Oxygen Sensor (Bank 1 Sensor 1) Slow Response |
P0153 | Air Fuel Sensor (Bank 2 Sensor 1) Slow Response |
P1100 | MAP Sensor Performance |