|
1996 Ford Windstar GL 3.8L Poor Idle Quality, Misfire, MIL Lamp on
when under hot soak condition only van idles poorly,misses until after a few minutes then runs great until you let it sit and problem reoccurs.,removed fuel lines,very little fuel came out,but alot of air [...] pump amps 2.00,good pattern,good volume,cleaned i...
FIX posted 2/6/2002
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 11 Replies Received (View Replies)11 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
11 Replies Received
11 Replies Received
Related Documents & Media | VIN | 2FMDA5142T |
| Engine | 3.8 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Misfire, MIL Lamp On |
| Occurs | Idle, After a Hot Soak |
Trouble Codes
| P0171 | Fuel System Too Lean (Bank 1) |
| P0174 | Fuel System Too Lean (Bank 2) |
| P1131 | Electric Vacuum Pump System Related PGM-FI Sensor Signal Malfunction |
Message Closed w/FIX
Vehicle Data
1996 Ford Windstar GL
| VIN | 2FMDA5142T |
| Engine | 3.8 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Misfire, MIL Lamp On |
| Occurs | Idle, After a Hot Soak |
Trouble Codes
| P0171 | Fuel System Too Lean (Bank 1) |
| P0174 | Fuel System Too Lean (Bank 2) |
| P1131 | Electric Vacuum Pump System Related PGM-FI Sensor Signal Malfunction |
Video