|
1997 Ford E-250 Econoline 5.4L No Start
i have a no start condition, low volyage at the fuel pump connector i have battery voltage at the relay but drops to 6.5 volts at the inertia switch. also i get about 3.5 volts at the ground terminal at the connector for the fuel pump and the diagram says this...
FIX posted 10/1/2001
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle
|
Message Closed w/FIX
|
Related Documents & Media 
| VIN | 1FTHEZ4L9V |
| Engine | 5.4 L / 8 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI |
| Emissions | OBD-II Compliant |
| Symptoms | No Start |
| Occurs | Always |
Trouble Codes
| P0232 | Fuel Shutoff Signal Circuit Too High |
Message Closed w/FIX
Vehicle Data
1997 Ford E-250 Econoline
| VIN | 1FTHEZ4L9V |
| Engine | 5.4 L / 8 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | FI |
| Emissions | OBD-II Compliant |
| Symptoms | No Start |
| Occurs | Always |
Trouble Codes
| P0232 | Fuel Shutoff Signal Circuit Too High |
Video