|
2013 Ford E-150 4.6L Poor Idle Quality, Cuts out, Stall
Van was towed in no fuel pressure. Found above codes except P0104 that didn't show up until I got it running. Found no power at fuel pump control module. Next went to fuse box to check fuse #43 [been there seen it] no problems found. Had power to injectors... 
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 10 Replies Received (View Replies)10 Replies Received (Hide Replies)
|
Open Help Request
|
10 Replies Received
10 Replies Received
Related Documents & Media | VIN | 1FTNE1EW4D |
| Engine | 4.6 L / 8 cyl / FLEX |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Cuts Out, Stall |
| Occurs | Always |
Trouble Codes
| P0053 | Heated Oxygen Sensor (Bank 1 Sensor 1) Heater Resistance |
| P0104 | MAF Sensor Throttle Angle And Speed |
| P0132 | Heated Oxygen Sensor (Bank 1 Sensor 1) Circuit High Voltage |
| P2198 | Fuel Quantity Solenoid Circuit Short To Voltage |
| U0109 | Lost com with fuel pump module |
Open Help Request
Vehicle Data
2013 Ford E-150
| VIN | 1FTNE1EW4D |
| Engine | 4.6 L / 8 cyl / FLEX |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | OBD-II Compliant |
| Symptoms | Poor Idle Quality, Cuts Out, Stall |
| Occurs | Always |
Trouble Codes
| P0053 | Heated Oxygen Sensor (Bank 1 Sensor 1) Heater Resistance |
| P0104 | MAF Sensor Throttle Angle And Speed |
| P0132 | Heated Oxygen Sensor (Bank 1 Sensor 1) Circuit High Voltage |
| P2198 | Fuel Quantity Solenoid Circuit Short To Voltage |
| U0109 | Lost com with fuel pump module |
Video