|
1995 Ford Taurus SHO 3.2L Poor Idle Quality, Surge, Stall, lack of power
We got this low mileage SHO in for stalling at stops after about 10 minutes of driving. After a short test drive we found that it would lack power and surge when trying to accelerate and also had pinging like a car with run on after shut off while trying to ac...
FIX posted 3/7/2014
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 9 Replies Received (View Replies)9 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
9 Replies Received
9 Replies Received
Related Documents & Media | VIN | 1FALP54P2S |
| Engine | 3.2 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | Not OBD-II Compliant |
| Symptoms | Poor Idle Quality, Surge, Stall, Lack of Power |
| Occurs | Hot, on Accel, Idle |
Trouble Codes
| 124 | tps volts higher than expected |
| 212 | loss of ignition diag monitor input to pcm |
| 215 | coil 1 primary circuit fault |
| 216 | coil 2 primary circuit fault |
| 217 | coil 3 primary circuit fault |
| 645 | incorrect 1st gear ratio |
Message Closed w/FIX
Vehicle Data
1995 Ford Taurus SHO
| VIN | 1FALP54P2S |
| Engine | 3.2 L / 6 cyl / GAS |
| Trans | 4-speed Automatic (Electronic) |
| Delivery | Fuel Injection |
| Emissions | Not OBD-II Compliant |
| Symptoms | Poor Idle Quality, Surge, Stall, Lack of Power |
| Occurs | Hot, on Accel, Idle |
Trouble Codes
| 124 | tps volts higher than expected |
| 212 | loss of ignition diag monitor input to pcm |
| 215 | coil 1 primary circuit fault |
| 216 | coil 2 primary circuit fault |
| 217 | coil 3 primary circuit fault |
| 645 | incorrect 1st gear ratio |
Video