
2006 Ford F-250 Super Duty XLT 6.0L No Start
6.0 starts fine cold, when hot is hard to start if it sits more than a few minutes. ICP pressure stays at about 250 psi for 10-20 seconds, gradually starts building and engine starts at about 500 psi. Classic symptoms of a high pressure oil leak. This is the f...
FIX posted 8/13/2013
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)17 Replies Received(Hide Replies)17 Replies Received
|
Message Closed w/FIX
|
VIN | 1FTSW21P06 |
Engine | 6.0 L / 8 cyl / DIESEL |
Trans | 6-speed Standard |
Delivery | Fuel Injection / Dsl. EFI |
Emissions | OBD-II Compliant |
Symptoms | No Start |
Occurs | Hot |
Trouble Codes
P0401 | EGR System Insufficient Flow Detected |
P2291 | Injector Control Pressure Too Low - Engine Cranking |
Message Closed w/FIX
Vehicle Data
2006 Ford F-250 Super Duty XLT
VIN | 1FTSW21P06 |
Engine | 6.0 L / 8 cyl / DIESEL |
Trans | 6-speed Standard |
Delivery | Fuel Injection / Dsl. EFI |
Emissions | OBD-II Compliant |
Symptoms | No Start |
Occurs | Hot |
Trouble Codes
P0401 | EGR System Insufficient Flow Detected |
P2291 | Injector Control Pressure Too Low - Engine Cranking |