
1992 Ford Taurus GL 3.0L No Start
ok,here goes, i have no pewr to the pink/black wire to fuel pump,engine will start and run if i supply power at the inertia switch,wich i did to get into shop. koec i dont get power at the pink/black wire at ccr module either. next checked power at lb/o wire a...
FIX posted 1/12/2011
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)21 Replies Received(Hide Replies)21 Replies Received
|
Message Closed w/FIX
|
VIN | 1FACP50U2N |
Engine | 3.0 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection / SEFI |
Emissions | OBD1 |
Symptoms | No Start |
Occurs | Intermittently |
Trouble Codes
114 | Intake air temp circuit out of range |
116 | Ect or eot sensor out of range |
512 | Kam test failure |
542 | Fuel pump circuit open eca to ground |
543 | Fuel pump circuit open batt. To eca |
636 | Trans oil temp sensor |
Message Closed w/FIX
Vehicle Data
1992 Ford Taurus GL
VIN | 1FACP50U2N |
Engine | 3.0 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection / SEFI |
Emissions | OBD1 |
Symptoms | No Start |
Occurs | Intermittently |
Trouble Codes
114 | Intake air temp circuit out of range |
116 | Ect or eot sensor out of range |
512 | Kam test failure |
542 | Fuel pump circuit open eca to ground |
543 | Fuel pump circuit open batt. To eca |
636 | Trans oil temp sensor |