
2004 Ford E-250 4.6L Misfire, MIL Lamp on
We checked the plugs on the affected cylinders. They were very bad so we replaced them all. No change. We switched coils from good to bad cylinders. No change. Visual check on all wiring and connectors showed no heat or rubbing issues. Checked and redid all gr...
FIX posted 1/5/2007
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)16 Replies Received(Hide Replies)16 Replies Received
|
Message Closed w/FIX
|
VIN | 1FTNE24WX4 |
Engine | 4.6 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Misfire, MIL Lamp On |
Occurs | Always |
Trouble Codes
P0325 | Knock Sensor 1 Circuit Malfunction |
P0351 | Ignition Control Module Circuit 1 Malfunction |
P0352 | Ignition Control Module Circuit 2 Malfunction |
P0353 | Ignition Control Module Circuit 3 Malfunction |
P0357 | Ignition Coil 7 Primary Circuit Malfunction |
P2196 | Heated Oxygen Sensor (Bank 1 Sensor 1) Biased Rich |
Message Closed w/FIX
Vehicle Data
2004 Ford E-250
VIN | 1FTNE24WX4 |
Engine | 4.6 L / 8 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI |
Emissions | OBD-II Compliant |
Symptoms | Misfire, MIL Lamp On |
Occurs | Always |
Trouble Codes
P0325 | Knock Sensor 1 Circuit Malfunction |
P0351 | Ignition Control Module Circuit 1 Malfunction |
P0352 | Ignition Control Module Circuit 2 Malfunction |
P0353 | Ignition Control Module Circuit 3 Malfunction |
P0357 | Ignition Coil 7 Primary Circuit Malfunction |
P2196 | Heated Oxygen Sensor (Bank 1 Sensor 1) Biased Rich |