
2012 Mercedes-Benz ML350 4Matic 3.5L Hesitation, Cuts out, Stall, MIL Lamp on
OK guys, I need help. This ML intermittently is low on power and sometimes stalls. According to what I can find, the low pressure pump should be approx. 50 PSI at idle. It stays close to that according to the scan tool, but a manual test shows it being con...
Summary posted 7/26/2021
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)3 Replies Received(Hide Replies)3 Replies Received
|
Message Closed w/Summary
|
VIN | 4JGDA5HB2C |
Engine | 3.5 L / 6 cyl / GAS |
Trans | 7-speed Automatic (Electronic) |
Delivery | Fuel Injection / direct injection |
Emissions | OBD-II Compliant |
Symptoms | Hesitation, Cuts Out, Stall, MIL Lamp On |
Occurs | Hot, on Accel, Idle, Intermittently |
Trouble Codes
P08A0 | The pressure in the low pressure fuel circuit is too low. |
P62B6 | Internal control module fault exists in the monitoring function for the fuel injectors. The signal comparison is faulty |
Message Closed w/Summary
Vehicle Data
2012 Mercedes-Benz ML350 4Matic
VIN | 4JGDA5HB2C |
Engine | 3.5 L / 6 cyl / GAS |
Trans | 7-speed Automatic (Electronic) |
Delivery | Fuel Injection / direct injection |
Emissions | OBD-II Compliant |
Symptoms | Hesitation, Cuts Out, Stall, MIL Lamp On |
Occurs | Hot, on Accel, Idle, Intermittently |
Trouble Codes
P08A0 | The pressure in the low pressure fuel circuit is too low. |
P62B6 | Internal control module fault exists in the monitoring function for the fuel injectors. The signal comparison is faulty |