
1997 BMW Z3 Roadster 2.8L Poor Idle Quality, Hesitation, Surge, Cuts out, Stall, Misfire, Poor Fuel Economy
I have a 1997 BMW Z3 that when taking off it has to be between [...] rpms or it will sputter and die. When it happens if you push the clutch in and rev the motor for about 5 minutes it will idle fine. Also when driving it will hesitate and sputter when driving...
FIX posted 12/16/2011
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)8 Replies Received(Hide Replies)8 Replies Received
|
Message Closed
|
VIN | 4USCJ332XV |
Engine | 2.8 L / 6 cyl / GAS |
Trans | 5-speed Standard |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | Poor Idle Quality, Hesitation, Surge, Cuts Out, Stall, Misfire, Poor Fuel Economy |
Occurs | Always |
Trouble Codes
P0101 | Mass Airflow Sensor Range/Performance |
P0170 | Fuel Trim Too Rich Or Too Lean |
P0300 | Multiple Misfire Detected |
P0301 | Cylinder 1 Misfire Detected |
P0306 | Cylinder 6 Misfire Detected |
P1188 | Throttle Inlet Pressure Sensor Performance |
Message Closed
Vehicle Data
1997 BMW Z3 Roadster
VIN | 4USCJ332XV |
Engine | 2.8 L / 6 cyl / GAS |
Trans | 5-speed Standard |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | Poor Idle Quality, Hesitation, Surge, Cuts Out, Stall, Misfire, Poor Fuel Economy |
Occurs | Always |
Trouble Codes
P0101 | Mass Airflow Sensor Range/Performance |
P0170 | Fuel Trim Too Rich Or Too Lean |
P0300 | Multiple Misfire Detected |
P0301 | Cylinder 1 Misfire Detected |
P0306 | Cylinder 6 Misfire Detected |
P1188 | Throttle Inlet Pressure Sensor Performance |