
1998 Chrysler Sebring JX 2.5L Poor Idle Quality, Hesitation, Cuts out, Stall, Misfire, MIL Lamp on
car runs bad at times, seems like timing retards so bad that it pops and backfires,then it will run ok for a few min, if you try to drive it, give it gas and it boogs out but if you stay in it car will come back and run good fuel pressure is good, exhaust is n...
FIX posted 1/18/2006
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)8 Replies Received(Hide Replies)8 Replies Received
|
Message Closed w/FIX
|
VIN | 3C3EL45H1W |
Engine | 2.5 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / multi port |
Emissions | OBD-II Compliant |
Symptoms | Poor Idle Quality, Hesitation, Cuts Out, Stall, Misfire, MIL Lamp On |
Occurs | Cold, Hot, Under Load, Intermittently |
Trouble Codes
P0300 | Multiple Misfire Detected |
P0402 | Excessive EGR System Excessive Flow Detected |
P1391 | CKP Or CMP Sensor Signal Intermittent |
Message Closed w/FIX
Vehicle Data
1998 Chrysler Sebring JX
VIN | 3C3EL45H1W |
Engine | 2.5 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | FI / multi port |
Emissions | OBD-II Compliant |
Symptoms | Poor Idle Quality, Hesitation, Cuts Out, Stall, Misfire, MIL Lamp On |
Occurs | Cold, Hot, Under Load, Intermittently |
Trouble Codes
P0300 | Multiple Misfire Detected |
P0402 | Excessive EGR System Excessive Flow Detected |
P1391 | CKP Or CMP Sensor Signal Intermittent |