
2012 Jeep Wrangler Unlimited Sahara 3.6L MIL Lamp on
B2 S1 Sensor was a flat line at 3.2V or so with no switching or driveablility problems engine ran good. Smoked intake manifold and found small amount of smoke leaking so replaced gaskets still no change in O2 Sensor reading. Reset code and adaptations no c...
FIX posted 11/3/2021
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)9 Replies Received(Hide Replies)9 Replies Received
|
Message Closed w/FIX
|
VIN | 1C4BJWEG5C |
Engine | 3.6 L / 6 cyl / GAS |
Trans | 5-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | MIL Lamp On |
Occurs | After Several Miles at 60Mph or So |
Trouble Codes
P0152 | Heated Oxygen Sensor (Bank 2 Sensor 1) Circuit High Voltage |
P2098 | Downstream Fuel System Lean - HO2S-22 (Bank 2 Sensor 2) |
Message Closed w/FIX
Vehicle Data
2012 Jeep Wrangler Unlimited Sahara
VIN | 1C4BJWEG5C |
Engine | 3.6 L / 6 cyl / GAS |
Trans | 5-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | MIL Lamp On |
Occurs | After Several Miles at 60Mph or So |
Trouble Codes
P0152 | Heated Oxygen Sensor (Bank 2 Sensor 1) Circuit High Voltage |
P2098 | Downstream Fuel System Lean - HO2S-22 (Bank 2 Sensor 2) |