
2001 Chrysler Town & Country Limited 3.8L Hesitation, Cuts out, Stall, MIL Lamp on
there are three wires. reference ground and return signal. I have 5 volt reference but nothing coming back on return signal. tried replacing the sensor twice. scanner still reads 0 volts
FIX posted 4/26/2017
![]()
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle (View Replies)16 Replies Received(Hide Replies)16 Replies Received
|
Message Closed
|
VIN | 2C8GP64L11 |
Engine | 3.8 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | Hesitation, Cuts Out, Stall, MIL Lamp On |
Occurs | Always, Under Load, Idle |
Trouble Codes
P0107 | Manifold Air Pressure Sensor Circuit Low Voltage |
Message Closed
Vehicle Data
2001 Chrysler Town & Country Limited
VIN | 2C8GP64L11 |
Engine | 3.8 L / 6 cyl / GAS |
Trans | 4-speed Automatic (Electronic) |
Delivery | Fuel Injection |
Emissions | OBD-II Compliant |
Symptoms | Hesitation, Cuts Out, Stall, MIL Lamp On |
Occurs | Always, Under Load, Idle |
Trouble Codes
P0107 | Manifold Air Pressure Sensor Circuit Low Voltage |