|
2006 Jeep Wrangler SE 2.4L No Start
As above, will not crank. Jumping starter relay control wire to ground at PCM C3 Pin 38 will allow engine to be cranked with key. No ground present at PCM C3 Pin 21, which is clutch switch. Clutch switch works properly and provides a ground. If PCM C3 Pin 21 (...
FIX posted 2/25/2016
iATN Members:
Login to view full TechHelp request Auto Repair Pros: Join iATN to read this TechHelp request Vehicle Owners: Find a nearby iATN member to repair your vehicle 13 Replies Received (View Replies)13 Replies Received (Hide Replies)
|
Message Closed w/FIX
|
13 Replies Received
13 Replies Received
Related Documents & Media | VIN | 1J4FA29156 |
| Engine | 2.4 L / 4 cyl / GAS |
| Trans | 6-speed Standard |
| Delivery | Fuel Injection / MPFI |
| Emissions | OBD-II Compliant |
| Symptoms | No Start |
| Occurs | Always |
Trouble Codes
| P0463 | Fuel Level Sensor Circuit High Voltage |
| P0533 | A/C Pressure Sensor Circuit High Voltage |
| P0688 | ASD Relay Sense Circuit Low |
Message Closed w/FIX
Vehicle Data
2006 Jeep Wrangler SE
| VIN | 1J4FA29156 |
| Engine | 2.4 L / 4 cyl / GAS |
| Trans | 6-speed Standard |
| Delivery | Fuel Injection / MPFI |
| Emissions | OBD-II Compliant |
| Symptoms | No Start |
| Occurs | Always |
Trouble Codes
| P0463 | Fuel Level Sensor Circuit High Voltage |
| P0533 | A/C Pressure Sensor Circuit High Voltage |
| P0688 | ASD Relay Sense Circuit Low |
Video